Your session is about to timeout due to inactivity. Click OK to extend your time for an additional 480 minutes.
- Home
Vices
The maximum number of products that can be compared is 4. Please refine your selection.
Products: ( 1 - 11 )
VP Magnetic jaws - Copper SKU : MIG90102
Workbench-parallel vice SKU : MIG477755
Pipe vice SKU : MIG477752
Workbench parallel vice - Fixed Base SKU : MIG455265
Tembo workbench vice - Rotating base SKU : MIG455263
Vice with precision clip SKU : MIG455261
Product temporarily unavailable, coming back soon.
- Vice with extremely precise clamping and dovetail guide.
- Jaws made from case-hardened chromoly steel.
- Vice reinforced with special cast iron for improved service life.
- Screw protected by a cylindrical sheath.
From
£171.50 excl. VAT
£205.80 incl. VAT
unit Tube-clamping vice - Fixed base SKU : MIG455259
Pack of 4 sets of magnetic protective jaws SKU : MIG444689
Rotating base for vice SKU : MIG1795949
[ { "catentry_id" : "9580621", "Attributes" : { }, "AttributesLabels" :{ }, "AttributesValues" : { }, "Price" : { "contractPrice":"62.75" }, "SalesUnit" : { "salesUnitVal":"1/PCE" }, "ItemImage" : "/img/S/GRP/IC/AIG399523.jpg", "ItemImage467" : "/img/S/GRP/IC/AIG399523.jpg", "ItemThumbnailImage" : "/img/S/GRP/IC/AIG399523.jpg" } ]
Multi-function directionable vice - Revolving base SKU : MIG455268
Arrange your vice according to the job and not vice-versa
Product temporarily unavailable, coming back soon.
- 360° directionable horizontally and up to 50° vertically.
- Serrated jaws for better holding.
- Vice with tool carrier.
- Resistant to twisting and bending stresses guaranteeing faultless stability.
- Fast jaw opening system.
£62.75 excl. VAT
£75.30 incl. VAT
unit Worksite-maintenance 360° swivel vices SKU : MIG2998734
Product temporarily unavailable, coming back soon.
- Vices made from spheroid graphite cast iron, tensile strength 700 N/mm² minimum.
- Wide bearing base of the prism guide/mobile jaw: lack of guide flexion, vice operation preserved even under heavy loads.
- Interchangeable parallel jaws. High wear resistance, hardness HRC 48/53.
- Removable V-shaped jaws for tightening pipes. Hardness HRC 40/46.
- Adjustment system with 2 complex gap compensation screws.
- Finish: burnished control bar.
From
£409.00 excl. VAT
£490.80 incl. VAT
unit { searchResult: { pageSize: 48, searchTerms: '', totalPageNumber: 1.0, totalResultCount: 11, currentPageNumber:1, attributes: "" } }