Pallet Racking Accessories

Products: ( 1 - 35 )

SKU : MIG3855167

Pallet racking frame ready for assembly and installation

These frames are manufactured according to European FEM standards
Available with either a hard wearing powder coated blue or galvanised finish
Supplied with floor fixings and shims
Levels can be adjusted by every 50mm
Only compatible with pallet racking systems previously supplied by Rapid Racking
Note: Frames come in component form and require assembling on site.
Not suitable for outdoor use, for outdoor applications please contact our technical team on the number below.
For any technical advice, frame build quotes, or configurations which are not available please call us on 08000 147 444.
These frames are a new style that are not always compatible with older Rapid Racking pallet racking systems, please call 08000 147 444 to check compatibility.

From

£127.25 excl. VAT

£152.70 incl. VAT

unit

See the 25 options

SKU : MIG3855231

Store tall items in pallet racking with bar racks which can be incorporated into any pallet racking bay

Ideal storage solution for a business with mixed storage requirements
Make use of pallet racking to store tall items upright
Available in 2 sizes
Powder coated blue finish
Fits 40mm Beams Only

From

£59.75 excl. VAT

£71.70 incl. VAT

unit

See the 2 options

SKU : MIG17216614

Galvanised wire mesh decks to be used with pallet racking for irregular sized loads

Easy to install - fits over beams
Allows for air and water flow
Galvanised finish for durability
Great for cartons and irregular sized loads
Manufactured to European standards of FEM and UK standard BS EN ISO 9001 2000

From

£46.50 excl. VAT

£55.80 incl. VAT

See the 14 options

SKU : MIG3855199

Heavy duty corner post protector to prevent damage to shelving

High visibility yellow paint finish
Includes 4 x 12 mm floor anchors
5 mm thick steel construction
400 mm high, internal width 173 mm (220 mm with mounting plate)
Mounting holes 16 mm diameter
Suitable for use with Long Span products
Not recomended for pallet racking, please see A363136

£23.25 excl. VAT

£27.90 incl. VAT

unit

Add To Basket

SKU : MIG3855043

Pair of pallet racking beams which hold up to 3000kg UDL per pair and include safety clips

These beams are manufactured according to European FEM standards
Available with either a hard wearing powder coated orange or galvanised finish
Supplied in pairs with the required safety clips
Only compatible with pallet racking systems previously supplied by Rapid Racking
Not suitable for outdoor use, for outdoor applications please contact our technical team on 08000 147 444

From

£54.90 excl. VAT

£65.88 incl. VAT

See the 14 options

SKU : MIG3860017

Single long span shelving frame, ideally for replacing damaged frames

Supplied with footplates these frames are easy to install.
Shelf heights can be adjusted every 25mm.
Includes floor fixings, foot plates and shims.
Note: Frames come in component form and require assembling on site.
For any technical advice, frame build quotes, or configurations which are not avaliable please call us on 08000 147 444.

From

£44.00 excl. VAT

£52.80 incl. VAT

unit

See the 6 options

SKU : MIG8349477

These protectors will fit any make of pallet racking. Choose yellow or Visusafe® yellow

Manufactured from ballistics grade plastic which will deflect the hardest of impacts.
The rack armour provides an 80% reduction in racking damage levels.
Tight fit – won’t come off as easily as other protectors.
Quick and easy installation – no fixings required.
High visibility colours offer safe working boundaries for MHE drivers.
The plastic material is non-toxic and fully recyclable.
Impervious to moisture, mould growth, corrosion, acid, alkaline and most solvents.
Rack Armour can also be used at temperatures down to -40°C.

From

£28.75 excl. VAT

£34.50 incl. VAT

unit

See the 8 options

SKU : MIG3855189

Pallet racking post protector to prevent damage to the racking by machinery

Pallet racking post protector to prevent damage to the racking
5 mm thick steel
Comply with SEMA Code of Practice
Height: 600 mm, Depth: 247 mm, Width: 190 mm (excluding mount points), 285 mm (including mounting points)
Maximum internal width = 180 mm
Mouting holes = 15 mm diameter
4 x floor fixings and floor anchors are included
We recommend they particularly be placed at rack ends.

£51.90 excl. VAT

£62.28 incl. VAT

unit

Add To Basket

SKU : MIG3855215

Pallet rack post protectors made from grade 5 steel

Pallet racking post protectors prevent impact damage
5mm steel construction
Comply with SEMA Code of Practice
Floor anchors are included
Height: 400 mm, Width: 190 mm, Depth: 320 mm (excluding mounting plates), 347 mm (including mounting plates)
Maximum internal width = 180 mm
Mounting holes: 16 mm diameter
We recommend they particularly be placed at rack ends.

£38.00 excl. VAT

£45.60 incl. VAT

unit

Add To Basket

SKU : MIG3854776

Chipboard decks complete with steel supports allowing for hand loading

Heavy duty chipboard deck - 25mm thick manufactured to P2 specification
Complete with steel supports to support the chipboard nd hold it within position on the beams.
EU Manufactured.
Packs of 5

From

£103.00 excl. VAT

£123.60 incl. VAT

See the 9 options

SKU : MIG8349481

The handy tool to help you install Rack Armour upright protectors

Provides quick and easy installation of your rack armour.

From

£28.50 excl. VAT

£34.20 incl. VAT

unit

See the 2 options

SKU : MIG3855209

Frame protector to keep goods and racking safe from machinery

Frame Protectors comply with SEMA Code of Practice
High visibility yellow paint finish
Includes 2 post protectors, 2 protector rails, 1 support and all fixings
Floor fixings included (M12 x 99 mm sleeve anchor floor fixings)
Required when storing goods adjacent to racking
Available in 900mm, 1100mm, 2000mm & 2400mm lengths
Suitable for single and double width pallet racking frames

From

£180.00 excl. VAT

£216.00 incl. VAT

See the 8 options

SKU : MIG3860241

Chipboard shelves offer a great cost effective solution as a smooth and hard wearing shelf surface

This chipboard shelf is ideal for adding to an existing long span system.
Maximum load capacity of up to 1100kg Uniform Distributed Load (UDL) per shelf. Exact weight bearing information will update after you've made your selections.
Includes beams, shelf supports, chipboard and safety clips.

From

£28.25 excl. VAT

£33.90 incl. VAT

unit

See the 14 options

SKU : MIG93011667

Double Rail eFlex RackEnd Protective Barriers by A-Safe

Double railed eFlex RackEnds by A-Safe.
Protect the ends of your Pallet Racking runs with these end barriers.
Tested to withstand up to 1000 joules of energy.
Make sure to install using the A-Safe fixing kit.

From

£419.00 excl. VAT

£502.80 incl. VAT

unit

See the 17 options

SKU : MIG3855647

Mesh cladding panels for Rapid 2 shelving bays, ideal that extra level of safety and preventing items...

Can be used for backs and sides, but also in-between bays
Ensures light and air penetration
Supplied with cable ties for installation

From

£24.00 excl. VAT

£28.80 incl. VAT

unit

See the 8 options

SKU : MIG4082367

Turn a part of your pallet racking into storage for smaller boxes by adding galvanised panels

Compatible with 2700 mm pallet racking beams which have a thickeness of 40 mm
Ideal for storage of hand loaded items within pallet racking
Supplied as a kit of panels to fill the complete pallet racking level

From

£190.75 excl. VAT

£228.90 incl. VAT

unit

See the 2 options

SKU : MIG32895581

Used - Post protector

As a used product this may contain cosmetic defects, but rest assured this product has been through our quality check process to ensure it is fit for use.
Pallet racking post protector to prevent damage to the racking.
5 mm thick steel.
Comply with SEMA Code of Practice.
Height: 600 mm, Depth: 247 mm, Width: 190 mm (excluding mount points), 285 mm (including mounting points).
Maximum internal width = 180 mm.
Mounting holes = 15 mm diameter.
We recommend they particularly be placed at rack ends.

£51.00 excl. VAT

£61.20 incl. VAT

unit

Add To Basket

SKU : MIG93011662

Single Rail eFlex RackEnd Protective Barriers by A-Safe

Single railed eFlex RackEnds by A-Safe.
Protect the ends of your Pallet Racking runs with these end barriers
Tested to withstand up to 1000 joules of energy.
Make sure to install using the A-Safe fixing kit.

From

£380.00 excl. VAT

£456.00 incl. VAT

unit

See the 13 options

SKU : MIG3860219

Galvanised shelves are great for storing oily or greasy products and are easy to clean

This galvanised steel shelf is ideal for adding to an existing long span system.
Maximum load capacity of up to 1100kg Uniform Distributed Load (UDL) per shelf. Exact weight bearing information will update after you've made your selections.
Includes beams, shelf supports, galvanised steel panels and safety clips.

From

£108.75 excl. VAT

£130.50 incl. VAT

unit

See the 10 options

SKU : MIG3855185

Keep your outdoor or cold store pallet racking safe with these galvanized frame protectors

Keep your outdoor, or cold store, pallet racking safe with these galvanized post protectors
Includes 4 x 12mm floor fixings
5mm thick construction
Floor anchors included
Height: 600mm

£83.00 excl. VAT

£99.60 incl. VAT

unit

Add To Basket

SKU : MIG3855083

Protection barriers in a selection of widths to suit the depth of your racking system or machinery

Protection barriers comply with SEMA Code of Practice
Available in a selection of four widths to suit the depth of your racking system, or warehouse machinery
Prevents impact damage
Heavy duty tubular barriers with rounded corners for maximum safety
Bright orange finish
500mm high with 89mm diameter tube
Floor fixings included (M12 x 99 mm sleeve anchor floor fixings)
Please be aware, these do not protect your post - they are to be used at the end of a run of racking in order to protect the racking frame
Guidelines for installation: Min 200 mm to Max 600 mm (measured from the front of the protector) away from the end of the racking frame
Can be used to protect any warehouse equipment and shelving component

From

£265.00 excl. VAT

£318.00 incl. VAT

unit

See the 4 options

SKU : MIG6059324

Rack End Protector Kit

Innovative Controlled Deflection
With each hit, bump and scuff, our Rack End Protector diffuses impact stopping forklifts and pallet jacks with a calculated amount of energy absorption
High visibility : Your best defence is being seen
All-angle protection : Absorbs direct impacts, deflects glancing blows
Zero maintenance : Install it once, get peace of mind for years

From

£303.00 excl. VAT

£363.60 incl. VAT

unit

See the 4 options

SKU : MIG34532251

Wire mesh deck divider for pallet racking decks

Wire mesh deck dividers easily clip onto mesh pallet racking decks
Enables the easy separation of products on mesh decks
No tools required, just clips into place

From

£16.00 excl. VAT

£19.20 incl. VAT

unit

See the 2 options

SKU : MIG4082366

Keep your outdoor or cold store pallet racking safe with these galvanized frame protectors

Galvanized Frame Protector
Includes 4 x 16mm floor fixings
5mm thick construction
600mm high

£75.00 excl. VAT

£90.00 incl. VAT

unit

Add To Basket

SKU : MIG3855635

MDF Cladding Panels are ideal for enclosing bays to ensure safe storage of parts

MDF boards cut to size to clad Rapid 2 shelving bays
Ensures safe storage of small parts
Supplied with black plastic fixings pins to secure the panels in place

From

£15.00 excl. VAT

£18.00 incl. VAT

unit

See the 5 options

SKU : MIG6038219

Rack Mounted Guard Polyethylene

Flexible solution to protect your racking and its contents
Our Rack Mounted Guard is an easy-to-install, high-strength solution to protect your racking & its contents
The polyethylene body provides strength and durability to absorb impacts and is flexible to suit a variety of racking sizes
Just wrap the velcro straps around the racking leg and you’re done
Energy Absorbing Design Polyethylene body flexes open to absorb impact energy
Adjustable Protects a variety of rack sizes from 2⅜ (60 mm) to 3¾ (85 mm)
Quick Installation Quick and easy installation using velcro fastener straps
The Rack Mounted Guard exceeded impact requirements of EN 15512

From £30.50 Up to -30%

£23.00 excl. VAT

£27.60 incl. VAT

unit

See the 2 options

SKU : MIG93011670

Barrier Posts for Single RackEnd from A-Safe

Barrier posts for Single A-Safe eFlex RackEnds. Tested to BSI PAS 13 Standards. Designed to protect the end of racking ailes where vehicles and equipment can impact vulnerable structures. Circular end posts provide enhanced protection at barrier ends where the majority of impacts occur.

£230.00 excl. VAT

£276.00 incl. VAT

unit

Add To Basket

SKU : MIG6038220

Column Guard Components

High strength column barrier
The modular, shock-absorbing assembly installs securely and cushions columns, equipment and drivers from impacts
Protect the structural integrity of your facility and the financial integrity of your business
Easy Installation : With 2 adjustable straps, no special skills or equipment required
Adjustable Fit : Modular design fits a variety of column sizes

From £12.00 Up to -21%

£10.00 excl. VAT

£12.00 incl. VAT

unit

See the 2 options

SKU : MIG3855203

Injection moulded pallet racking protection designed to minimise possible damage

Injection moulded pallet racking protection designed to minimise possible damage
Easy to install. No tools required.
Low replacement cost
Durable plastic injection moulded
Priced per individual unit (135mmh)
We recommend 3 units per post to conform with the 400mm minimum SEMA height requirement
Easy removal for racking inspection
Conforms to EN15512-2009 Storage Standards
Please be aware, after any impact item must be removed and the post checked for damage. Any damage after impact will be hidden, unless the protector is removed.

From

£6.35 excl. VAT

£7.62 incl. VAT

unit

See the 2 options

SKU : MIG93011679

Wear Collars for eFlex RackEnd - A-Safe

Wear Collars for A-Safe eFlex Rack Ends.
Innovative spinning collars dissipate and deflect impact forces to better protect your racking.

From

£13.99 excl. VAT

£16.79 incl. VAT

unit

See the 2 options

SKU : MIG93011677

Barrier Posts for Double RackEnd from A-Safe

Barrier posts for Double A-Safe eFlex RackEnds. Tested to BSI PAS 13 Standards. Designed to protect the end of racking ailes where vehicles and equipment can impact vulnerable structures. Double Rails are tested on heavier vehicles with higher centres of gravity, preventing damage to your racking system.

£235.00 excl. VAT

£282.00 incl. VAT

unit

Add To Basket

SKU : MIG3855223

Designed to support undersized pallets

Designed to support undersize pallets
Choose from 3 different depths
Two required per pallet
Suitable for most types of pallet racking

From

£11.35 excl. VAT

£13.62 incl. VAT

unit

See the 3 options

SKU : MIG3854979

High Quality Closed Timber Decks

Timbers are fitted directly next to each other, useful for storage of smaller goods
Maximises Potential Capacity, a variety of pallet types and individual products can be stored in a single racking system.
Fitted With Full Span Batons to Prevent Movement
Decks over 2250mm wide are supplied as two pieces for ease of handling
Other Sizes Available on Request
Manufactured to European standards of FEM and UK standard BS EN ISO 9001 2000

From

£58.75 excl. VAT

£70.50 incl. VAT

unit

See the 6 options

SKU : MIG3854989

High Quality Open Timber Decks

Maximises Potential Capacity, a variety of pallet types and individual products can be stored in a single racking system.
Spaces with a maximum gap of 37mm between each deck allows for airflow
Fitted With Full Span Batons to Prevent Movement
Decks over 2250mm wide are supplied as two pieces for ease of handling
Other Sizes Available on Request
Manufactured to European standards of FEM and UK standard BS EN ISO 9001 2000