Your session is about to timeout due to inactivity. Click OK to extend your time for an additional 120 minutes.
- Home
- Warehouse
- Industrial Warehouse Shelving
- Heavy Duty Shelving
Heavy Duty Shelving
The maximum number of products that can be compared is 4. Please refine your selection.
Products: ( 1 - 13 )
3 bays of our best selling Rapid 1 heavy duty shelving with tie plates
- Rapid 1: our strongest boltless shelving system holding up to 420kg per shelf, the strongest out of all our commercial shelving
- Boltless assembly using a rivet design - all you need is a rubber mallet
- Manufactured from 2mm thick heavy duty steel with a powder coated paint finish
- Each 16mm Chipboard shelf can hold a 420kg Uniformly Distributed Load (UDL)
- The UDL of 420kg has been independently tested to FEM industry standards for daily use in an industrial environment
- Adjustable shelves, every 38mm
- All shelves can be accessed from any side as no stability bracing is required
From £945.00 Up to -33%
£629.00 excl. VAT
£754.80 incl. VAT
Our best selling Rapid 1 heavy duty shelving with galvanised steel shelves, ideal for commercial use
- Rapid 1: our strongest boltless shelving system holding up to 400kg per shelf, the strongest out of all our commercial shelving
- Boltless assembly using a rivet design - all you need is a rubber mallet
- Manufactured from 2mm thick heavy duty steel with a powder coated paint finish
- Each Galvanised Steel shelf can hold up to 400kg Uniformly Distributed Load (UDL)
- The UDL of 400kg has been independently tested to FEM industry standards for daily use in an industrial environment
- Adjustable shelves, every 38mm
- All shelves can be accessed from any side as no stability bracing is required
From
£269.00 excl. VAT
£322.80 incl. VAT
unit This product is currently not available.
Our best selling Rapid 1 heavy duty shelving, ideal for commercial use
- Rapid 1: our strongest boltless shelving system holding up to 420kg per shelf, the strongest out of all our commercial shelving
- Boltless assembly using a rivet design - all you need is a rubber mallet
- Manufactured from 2mm thick heavy duty steel with a powder coated paint finish
- Each 15mm Chipboard shelf can hold up to 420kg Uniformly Distributed Load (UDL)
- The UDL of 420kg has been independently tested to FEM industry standards for daily use in an industrial environment
- Adjustable shelves, every 38mm
- All shelves can be accessed from any side as no stability bracing is required
From £249.00 Up to -25%
£186.75 excl. VAT
£224.10 incl. VAT
Our best selling Rapid 1 heavy duty shelving, ideal for commercial use
- Rapid 1: our strongest boltless shelving system holding up to 800kg per shelf, the strongest out of all our commercial shelving
- Boltless assembly using a rivet design - all you need is a rubber mallet
- Manufactured from 2mm thick heavy duty steel with a powder coated paint finish
- Each 16mm Chipboard shelf can hold up to 800kg Uniformly Distributed Load (UDL)
- The UDL of 800kg has been independently tested to FEM industry standards for daily use in an industrial environment
- Adjustable shelves, every 38mm
- All shelves can be accessed from any side as no stability bracing is required
From
£280.00 excl. VAT
£336.00 incl. VAT
unit This product is currently not available.
Our best selling Rapid 1 heavy duty shelving with Melamine shelves, ideal for commercial use
- Rapid 1: our strongest boltless shelving system holding up to 800kg per shelf, the strongest out of all our commercial shelving
- Boltless assembly using a rivet design - all you need is a rubber mallet
- Manufactured from 2mm thick heavy duty steel with a powder coated paint finish
- Each 18mm Melamine shelf can hold up to 800kg Uniformly Distributed Load (UDL)
- The UDL of 800kg has been independently tested to FEM industry standards for daily use in an industrial environment
- Adjustable shelves, every 38mm
- All shelves can be accessed from any side as no stability bracing is required
From
£162.50 excl. VAT
£195.00 incl. VAT
unit This product is currently not available.
Our best selling Rapid 1 shelving as a standard duty version for those slightly ligher loads , ideal for...
- Rapid 1: our strongest boltless shelving system holding up to 600kg per shelf, the strongest out of all our commercial shelving
- Boltless assembly using a rivet design - all you need is a rubber mallet
- Manufactured from 2mm thick heavy duty steel with a powder coated paint finish
- Each 16mm Chipboard shelf can hold up to 600kg Uniformly Distributed Load (UDL)
- The UDL of 600kg has been independently tested to FEM industry standards for daily use in an industrial environment
- Adjustable shelves, every 38mm
- All shelves can be accessed from any side as no stability bracing is required
From
£173.90 excl. VAT
£208.68 incl. VAT
unit This product is currently not available.
A tall, wide and heavy-duty shelving unit, ideal for your garage, shed or workshop
- The completely boltless Fastlok design is ideal for fast and hassle-free assembly - this freestanding shelving unit can be assembled in under 10 minutes.
- The struts are powder-coated steel.
- Metal uprights and side bar.
- Tough MDF shelves with a 400kg UDL (uniform distributed load) per shelf.
- Plastic feet.
£85.25 excl. VAT
£102.30 incl. VAT
unit This product is currently not available.
Rapid Basics Heavy Duty Shelving Units for garages, workshops and storerooms. Available with up to 600kg UDL.
- Hold up to 600kg UDL per shelf with these Rapid Basics Heavy Duty Shelving Units.
- Stylish yet durable dark grey powder coated paint finish makes these bays perfect for both home and industrial use.
- Easily Self-Assembled with a mallet due to Boltless Butterfly Rivet system.
- Shelving is attached to floor using metal feet to prevent sliding damage.
- Please note: Rapid recommend using a wood treating sealant on MDF boards especially when being stored in a damp/cold environment.
From £64.99 Up to -6%
£61.25 excl. VAT
£73.50 incl. VAT
This product is currently not available.
Our best selling Rapid 1 heavy duty shelving with a galvanised frame for outdoor applications
- Rapid 1: our strongest boltless shelving system holding up to 720kg per shelf, the strongest out of all our commercial shelving
- Boltless assembly using a rivet design - all you need is a rubber mallet
- Manufactured from 2mm thick heavy duty steel with a galvanised finish suitable for outdoor enviroments
- Each shelf can hold up to 720kg Uniformly Distributed Load (UDL)
- The UDL of 720kg has been independently tested to FEM industry standards for daily use in an industrial environment
- Adjustable shelves, every 38mm
- All shelves can be accessed from any side as no stability bracing is required
From
£130.90 excl. VAT
£157.08 incl. VAT
unit This product is currently not available.
A tall and extra wide heavy-duty shelving unit, ideal for your garage, shed or workshop
- The completely boltless Fastlok design is ideal for fast and hassle-free assembly - this freestanding shelving unit can be assembled in under 10 minutes.
- The struts are powder-coated steel.
- Metal uprights and side bar.
- Tough MDF shelves with a 400kg UDL (uniform distributed load) per shelf.
- Plastic feet.
£110.50 excl. VAT
£132.60 incl. VAT
unit This product is currently not available.
Ideal for products which are required to be used as first in first out (FIFO)
- Kanban Bay with the option of 3 or 5 sloping chipboard shelves
- Holds up to 200kg per shelves, 1000kg in total
- Avaliable with 8x 40 litre Euro containers (3 shelves) or 40 blue lin bins (5 selves)
From
£239.00 excl. VAT
£286.80 incl. VAT
Rapid 1 Galvanised Steel Standard Duty Shelves
- Rapid 1 Standard Duty Shelving holds up to 600kg per shelf, a lighter alternative to the strongest out of all our commercial shelving
- Boltless assembly using a rivet design - all you need is a rubber mallet
- Manufactured from 2mm thick heavy duty steel with a galvanised finish suitable for outdoor enviroments
- Each shelf can hold up to 600kg Uniformly Distributed Load (UDL)
- The UDL of 600kg has been independently tested to FEM industry standards for daily use in an industrial environment
- Adjustable shelves, every 38mm
- All shelves can be accessed from any side as no stability bracing is required
From
£139.75 excl. VAT
£167.70 incl. VAT
unit This product is currently not available.
Our Best Seller for Bulk Storage and the Strongest Shelving in the Rapid Range
- Rapid 1: our strongest boltless shelving system holding up to 450kg per shelf, the strongest out of all our commercial shelving
- Boltless assembly using a rivet design - all you need is a rubber mallet
- Manufactured from 2mm thick heavy duty steel with a powder coated paint finish
- Each Wire mesh shelf can hold up to 450kg Uniformly Distributed Load (UDL)
- The UDL of 450kg has been independently tested to FEM industry standards for daily use in an industrial environment
- Adjustable shelves, every 38mm
- All shelves can be accessed from any side as no stability bracing is required
- We recommend tie plates (code: A362443 for Blue & A362427 for Grey) for joining additional bays.
From
£395.00 excl. VAT
£474.00 incl. VAT
unit This product is currently not available.
{ searchResult: { pageSize: 48, searchTerms: '', totalPageNumber: 1.0, totalResultCount: 13, currentPageNumber:1, attributes: "" } }