Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30.
Fit these pads to comply with European standards on fire doors.
IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited.
External dimensions 360 x 360 internal dimensions 270 x 270mm
Designed for easy installation
Complete kit including glass and fixings
Suit 4445mm doors
304 grade stainless steel with brushed finish
30 minute fire rating
Twin glazedWhen fitting to front doors it is recommended that they are professionally installed and a suitable sealant is used to weatherproof the unit.
SKU : MIG3809937White Pack of 50 Pyroplex Fire & Smoke Intumescent Strip
White Pack of 50 Pyroplex Fire & Smoke Intumescent Strip
30 minute fire rated
The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its belts and braces way of getting through fire tests
The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status
Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently
All brushes are black with no plastic fin, reducing noise levels and resistance
Fully tested to BS 476 Pt 2022 and Pt 31.1 cold smoke leakage
Independently tested on a range of single and double leaf doorsets
Ideal for humid environments
High tack self adhesive backing for quick and easy fitting
SKU : MIG3809941Brown Pack of 50 Pyroplex Fire & Smoke Intumescent Strip
Brown Pack of 50 Pyroplex Fire & Smoke Intumescent Strip
30 minute fire rated
The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its belts and braces way of getting through fire tests
The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status
Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently
All brushes are black with no plastic fin, reducing noise levels and resistance
Fully tested to BS 476 Pt 2022 and Pt 31.1 cold smoke leakage
Independently tested on a range of single and double leaf doorsets
Ideal for humid environments
High tack self adhesive backing for quick and easy fitting
30 minute fire ratingWhen fitting to front doors it is recommended that they are professionally installed and a suitable sealant is used to weatherproof the unit.
30 minute fire ratingWhen fitting to front doors it is recommended that they are professionally installed and a suitable sealant is used to weatherproof the unit.
Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
Suitable for hinges over 100mm width
Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30 Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards. IMPORTANT LEGAL INFORMATION It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intum
SKU : MIG3809933White Pack of 10 Pyroplex Fire & Smoke Intumescent Strip
White Pack of 10 Pyroplex Fire & Smoke Intumescent Strip
30 minute fire rated
The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its belts and braces way of getting through fire tests
The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status
Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently
All brushes are black with no plastic fin, reducing noise levels and resistance
Fully tested to BS 476 Pt 2022 and Pt 31.1 cold smoke leakage
Independently tested on a range of single and double leaf doorsets
Ideal for humid environments
High tack self adhesive backing for quick and easy fitting
SKU : MIG3809859A valuable book to assist compliance with fire safety regulations.
A valuable book to assist compliance with fire safety regulations.
Contains a fully illustrated information guide and eight assessment forms with step by step instructions.
Includes informative sections for hazard identification, a comprehensive fire safety checklist, risk reduction action plan and a grid to sketch out potential problem areas.
To retain the integrity of FD30 and FD60 fire resisting doors use these fire rated letter plates
Tested to BS476 Part 20/22 the letter plates we offer are visibly similar to common letter plates with hidden intumescent material, providing an easy way of retaining the lock and achieving fire protection
Designed to fit doors from 44mm to 54mm thick by means of an adjustable centre sleeve connecting inside to out
Excellent sealing and robust enough for applications such as hostels or student accommodation
